Attack Shark Software Download & Setup Guide 2026

August 4, 2026

If you just bought an Attack Shark mouse or keyboard, the Attack Shark software is what unlocks DPI adjustment, button remapping, macros, and RGB control. This guide covers exactly how to get it, set it up, and fix it when it doesn’t work — without the filler.

What Is Attack Shark Software?

Attack Shark software is the configuration tool for Attack Shark mice, keyboards, and some headsets. It comes in two forms:

ATTACK SHARK HUB / WEB — runs in your browser (Chrome, Edge, or any Chromium browser) on Windows, Mac, or Linux. No install needed. Used by most current mouse and keyboard models.
Downloadable .exe software — a traditional Windows installer used for specific keyboards and headsets.

Which one you need depends entirely on your model — check your product before downloading anything.

How to Download Attack Shark Software

Go to attackshark.com/pages/driver-download — the only official source. Don’t download Attack Shark software from third-party sites.
Find your exact model (e.g., X3, X11, X68 HE, R85 HE, K86, L80 Pro). Each product entry lists whatever it actually has: Software, Web Driver, Manuals, or Firmware.
Click Software or Web Driver for your model:
- Most current mice and keyboards (X3, X8, X11, X65 HE, X68 HE, R-series, X85/X87/X98 series, etc.) → opens the browser-based HUB/WEB tool. Nothing to install.
- Some keyboards and headsets (e.g., L30 Pro, G800) → downloads a .exe installer.
If your device isn’t detected after downloading the listed version, some product pages note that newer batches need the newer software — try the older version listed on the same page if you’re unsure which batch you have.

Attack Shark Software Installation Steps

Only applies if your model uses the .exe installer:

Download the .exe for your exact model from the driver-download page.
Run it and follow the prompts.
Some headsets require a specific order — e.g., plug in the USB receiver before installing, or connect wirelessly first. Check your product’s page for any notes like this before you start.
Restart your computer after installing.
Power on or reconnect your device, then open the software.

If your model uses the HUB/WEB tool instead, skip all of this — just open the link with your device connected.

How to Connect Your Attack Shark Mouse or Keyboard

Wired: plug in directly via USB-C or USB-A.
Wireless: plug in the USB receiver, or pair via Bluetooth if your model supports it (many Attack Shark mice are tri-mode: wired, 2.4GHz, Bluetooth).
Open the software with the device connected — it should detect the model automatically. If not, see Troubleshooting below.

How to Use Attack Shark Software Settings

Adjust DPI and Sensitivity

Set your DPI stages in the sensitivity panel and assign them to the mouse’s DPI button. Some models also let you set X/Y axis separately and adjust polling rate (up to 8,000 Hz on newer models).

Customize Buttons and Macros

Remap any programmable button to another function, shortcut, or macro. The macro editor lets you record keystrokes/clicks, set delays, and choose single-play or repeat.

Change RGB Lighting Settings

Pick an effect (static, breathing, wave, reactive), set color/brightness/speed. Keyboards with per-key lighting let you customize individual keys or zones.

Create and Save Profiles

Save separate DPI/button/lighting setups as profiles (e.g., gaming vs. productivity) and switch between them without reconfiguring.

Attack Shark Software Compatible Devices

The HUB/WEB tool covers most current models: X3, X3 Pro, X6, X8 (Ultra/Ultimate/Pro/Plus/SE), X11, X11 SE, X11 Ultra, R1–R11 Ultra, G3/G3 Pro, V-series mice; and K75, K85, K86, X65 HE, X65 Pro HE, X68 HE, X68 Pro HE, X82 Pro HE, X85, X85 Pro, X86, X87 Ultra, X98, X98 Pro, R68 HE, R82 HE, R85 HE, R86 HE, R98 HE, and X820 Ultra keyboards.

Older models and some headsets (L30 Pro, G800) use the separate .exe installer instead. Always confirm on your specific model’s page — one download doesn’t cover every device.

How to Update Attack Shark Software

Go back to attackshark.com/pages/driver-download and find your model.
HUB/WEB tool: updates automatically since it runs in-browser — nothing to do.
.exe software: download the latest version and run it. No need to uninstall the old one first, but restart afterward.
Firmware updates, where listed, are applied through the software itself once your device is connected.

Attack Shark Software Not Working? Common Fixes

Software Not Detecting Device

Try a different USB port (motherboard/laptop directly, not a hub).
For wireless: confirm the receiver is seated and the device is charged/powered on.
Confirm you downloaded the software for your exact model — it won’t detect a different device.
Close other brands’ mouse/keyboard software running in the background.

Driver Issues

Reinstall from the official download page, not a saved older file.
If your unit is from a newer batch, check whether the product page flags a required newer version.
Restart your PC after installing/updating.

Connection Problems

2.4GHz wireless: keep the receiver close and away from interference (routers, USB 3.0 devices).
Bluetooth: unpair and re-pair if it keeps dropping.
Check battery/charge level — this is a common cause of what looks like a connection failure.

Attack Shark Software Alternatives

Third-party tools like SignalRGB can sync lighting across brands, but DPI switching and macros are best left to Attack Shark’s own software or web tool — third-party utilities don’t reliably support every proprietary feature.

FAQs

Where can I download Attack Shark software? attackshark.com/pages/driver-download — select your exact model.

Does Attack Shark software work on Windows 10 and Windows 11? Yes. The .exe installers target Windows; the HUB/WEB tool also runs on Mac and Linux in a Chromium browser.

How do I change DPI in Attack Shark software? Open the software with your mouse connected, go to the DPI/sensitivity tab, set your stages, and assign them to the DPI button.

How do I update Attack Shark drivers? Revisit your model’s page on the driver-download page and grab the current version; the HUB/WEB tool updates on its own.

Why is my Attack Shark mouse not detected? Usually a port/cable/receiver issue, the wrong software for your model, or an outdated driver — see Troubleshooting above.

Conclusion: Is Attack Shark Software Worth Installing?

Yes, if your device supports DPI adjustment, macros, or RGB — the software is the only way to access those features. The main thing to get right: match the software to your exact model on the official download page, since Attack Shark splits its lineup between the browser-based HUB and separate installers rather than using one universal app.